Archive for April, 2008
MPLS-based IPv6 VPN Labs (LDP or MPLS-TE)
Friday, April 25th, 2008 | Dynamips Lab | No Comments
Here’s the version 3 of my MPLS lab. I’ve taken the bold step to include the LDP version (v3) along side the MPLS-TE version (v3.5). Both labs are identical in every way, except the method of distributing labels (and the TE tunnels). The bonus in this new version is the addition of IPv6 VPNs, using Cisco’s 6VPE feature in 12.2.33 SRC. The VPNv6 setup is nearly identical to VPNv4, with the crazy addresses to throw us all for a loop. I was pretty amazed at how similar the configurations were. The VRF definitions were a change, but not a bad one. › Continue reading
dynagen New builds posted (080411)
Wednesday, April 16th, 2008 | Dynamips-Links | No Comments
There must be a problem with starting some routers, when more than 1 models are used.
In the following net file, ghostios is not created for 3640. It’s created only for 3620. › Continue reading
Best way to integrate PEMU with Dynamips
Thursday, April 10th, 2008 | Dynamips Lab | No Comments
Hi Friends,
I am new to using PEMU. I am able to run PEMU & Dynamips separely, but i am finding it hard to understand how to integrate PEMU & Dynamips. › Continue reading
Trunking physical switch to CCIE R&S Dynamips lab
Thursday, April 10th, 2008 | Dynamips Lab | No Comments
i am trying to add a Catalyst 3560 (SW5, ignore SW6 for now) switch to my Dynamips lab using only one NIC. SW5 will connect to a NIC that will be bridged to ETHSW1 to connecting a physical network to the R&S lab. (The other NIC will be connected to SW6 and bridge that to another Dynamips switch that will connect it to various VMWare labs. See the attached diagram.) › Continue reading
CCIE Voice Home lab with Dynamips/VMware
Monday, April 7th, 2008 | Dynamips Lab | No Comments
This is an attempt to simulate a decent CCIE Voice home lab on a single PC (with oodles of memory and a bleeding edge CPU). › Continue reading
PassGuide practice Test
